Advanced Research Manufacturing
Innovative High Purity Gas Supply System Solutions
Ph: 719.538.5959 E-Mail
Vessel Only
Purifier vessels or component sets are economical solutions for one time or short term applications. ARM provides in-house regenerations and regeneration kits where applicable. Standard off-the-shelf models as well as custom made-to-order solutions are available. (more)
Features & Benefits
• Flow rates to 300 slpm
• Vacuum to 20.5 MPa
•316L stainless HP & UHP housing
construction
• Easy to install - simple to
operate
• Component sets for heated
operation
• Easy customization to meet
specific application requirements
Options
• Sub-micron particle filtration
• Inlet / Outlet isolation valves
• Panel mounting
• Variety of inlet / outlet
connections
Applications
• Weld gas/purge gas
• Pharmaceutical production
• Semiconductor process
equipment
• Analytical equipment
• Annealing cover gas
Nova Series In-Line Purifiers
The Nova series of Gas Purifiers are complete point-of-use gas purifier systems. Models are available for a wide variety of flow rates with various options for all applications. The attractive compact steel enclosure is easily wall-mounted. The unit includes a simple electronic controller with front panel on/off switch and status indicator. (more)
Features & Benefits
• Flow rates to 150.0 slpm
• Compact sturdy steel vented wall
mount enclosure
• 316L stainless HP & UHP
construction
• Easy to install – simple to operate
• Front panel status indicators
• Integral preset temperature
controller
• Worldwide power input options
Options
• Sub-micron particle filtration
• Inlet / Outlet isolation valves
• Variety of inlet / outlet connections
• 100-120/220-240VAC 50/60Hz
input power options
Applications
• Weld gas/purge gas
• Pharmaceutical production
• Semiconductor process
equipment
• Analytical equipment
• Annealing cover gas
Any application requiring heated operation based on gas purified and impurities needing removal.
Pro-Panel Series Small Area Purifiers
The Pro-Panel series of Gas Purifiers are complete point-of-use systems. Models are available for a wide variety of flow rates with options for the selection of inlet/outlet fittings, particle filters, valve operation, facility power requirements, and electronic controls. The attractive steel enclosure is easily wall-mounted and features a secure, yet simple door latching system. A state-of-the-art electronics package includes a front panel on the enclosure door for operator interface and display of alarm and system status, as well as a full-featured PID heater controller with high temp limit safety. (more)
Features & Benefits
• Flow rates to 300.0 slpm
• Compact sturdy steel enclosure
with integral wall-mount tabs
• 316L stainless HP & UHP
construction
• Pressure to 20.5 MPa
• Simple electronic control panel
with audible alarm tone
• Sub-Micron particle filter options
• PID and high temp limit heat
controls
• General alarm output contact
options for plant monitoring
• Worldwide power input options
Options
• Sub-micron particle filtration
• Inlet / Outlet isolation valves
• Variety of inlet / outlet connections
• Air-operated or manual valve
options
• 100-120/220-240VAC 50/60Hz
input power options
Applications
• Weld gas/purge gas
• Pharmaceutical production
• Semiconductor process
equipment
• Analytical equipment
• Annealing cover gas
Any application required heated operation based on gas purified and impurities needing removal.
Any application requiring flow rates or automation beyond the capability of the Nova Series.
Nova Series GC Purifiers
Gas chromatography equipment uses a carrier gas to transport the sample gas through the GC column. to ensure the carrier gas does not contribute impurities to the sample gas under test, it is imperative to have a carrier gas of the highest purity possible.
Typical carrier gas choices include Helium, Argon and Nitrogen. Which gas is selected is dependent on the type of analyzer and impuriteis being measured. Regardless, the higher the carrier gas purity, the better the analyzer performance. (more)
Features
• Heated getter technology
• 12 month life at rated flow
• Flow rate to 200 sccm
• Integral particle filtration
• Stainless steel replaceable
vessel
• Low pressure drop
Benefits
• Optimized instrument
performance
• Improved column life
• Increased sensitivity (LDL)
• Reduced base-line noise
• Reduced maintenance
• Reproducible GC results
Options
• Alternate carrier gases
• Inlet/outlet fittings
High Purity Filters
ARM’s series of in line gas filters are available in stainless steel, Nickel and PTFE/PFA membranes to meet the demanding needs of many applications including, semiconductor, gas cabinets, specialty gas mixing, and process tool gas panels. (more)
Features & Benefits
• Flow rates to 150.0 slpm
• Low pressure drop
• Bakeable (stainless and Nickel)
• 316L stainless HP & UHP
construction
• Pressure to 20.5 MPa
• 9 log particle retention
• 99.9999999% removal of
0.003mm and larger particles
• <1 particle/ft3, <10 PPB THC, and
<10 PPB moisture
Options
• Sub-micron particle filtration
• Factory pre-conditioning
• Variety of inlet / outlet connections
• High pressures to 3000 PSIG
• High bulk flow rates
Applications
• Inert and corrosive gases
• Analytical equipment
• Semiconductor processing
equipment
• Pharmaceutical production
connect with us:
ARM Inc., 3685 South Highway 85-87, Suite 2, Colorado Springs, Colorado 80906
Ph: 719-538-5959 | FAX: 719-538-5960 | EMAIL: sales@arminc.com
© Copyright 2014 ARM, Inc. - All rights reserved | Website designed by Incognito Marketing
.....keep it simple
.....keep it clean
.....keep it flowing